A free import duty calculator is worth using when it gets eight things right: the current fiscal-year MPF floor and cap, every Chapter 99 "9903" line for your origin country, a customs value without international freight and insurance, HMF only on ocean freight, a 10-digit HTS code instead of a product category, results in cents, the HTS revision in force on your entry date, and no hidden insurance mark-ups. Test any tool against one known shipment and you will see within a minute which of these it handles.
We built our own calculator around these checks. This page gives you the same checklist, with the dollar effect of each miss on one reference shipment, so you can audit any tool you use.
The reference shipment
Use this as your test case in any calculator. It is simple, current, and every line can be checked against the HTS and the CFR.
| Input | Value |
|---|---|
| HTS code | 6109.10.00.12 (men's cotton knit T-shirts) |
| Origin | China |
| Customs value | $5,000 |
| Mode | Air |
| Entry date | 2026-11-14 |
The correct answer:
| Line | Amount |
|---|---|
| Base duty, 16.5% | $825.00 |
| 9903.88.15, + 7.5% | $375.00 |
| 9903.05.31, + 12.5% | $625.00 |
| Total duty (36.5%) | $1,825.00 |
| MPF (0.3464% = $17.32, raised to FY2027 floor) | $34.58 |
| HMF (air) | $0.00 |
| Landed (value + duty + fees) | $6,859.58 |
If a free tool returns $6,859.58, it passed. If not, the checks below show you where the gap comes from.
Check 1: which fiscal year is the MPF floor from?
MPF is 0.3464% of value under 19 CFR 24.23, bounded by a floor and cap that CBP resets every October 1. The fiscal 2027 values come from 91 FR 48398.
| Floor used | Fiscal year | MPF shown | Gap vs correct |
|---|---|---|---|
| $34.58 | FY2027, from 2026-10-01 | $34.58 | $0.00 |
| $33.58 | FY2026 | $33.58 | $1.00 low |
| $32.71 | FY2025 | $32.71 | $1.87 low |
| $31.67 | FY2024 | $31.67 | $2.91 low |
A dollar looks small. On a high-value entry the cap matters more: FY2027 caps MPF at $670.86, while a tool on FY2026 caps it at $651.50, a $19.36 gap per entry. And it tells you whether the tool's data is being maintained.
Check 2: are the 9903 lines filled in automatically?
Some calculators show the base rate and leave additional tariffs to a manual field. If you leave that field empty, it counts as zero.
On the reference shipment, base duty alone is $825.00. The correct duty is $1,825.00. An empty additional-tariff field understates the duty by $1,000.00, more than the base duty itself.
What to look for: the tool should list each 9903 heading by number (9903.88.15 and 9903.05.31 here) with its rate, so you can see what was applied and why.
Check 3: is freight and insurance kept out of the duty base?
The US is a FOB-style valuation country. 19 CFR 152.102(f) excludes "any charges, costs, or expenses incurred for transportation, insurance, and related services incident to the international shipment."
Test: enter $5,000 goods with $520 of freight and $80 of insurance. A tool that builds a CIF base of $5,600 charges 36.5% on $600 that is not dutiable: $219.00 of extra duty on this one shipment.
Check 4: is insurance being added that you never paid?
A quieter version of check 3: some tools add a default insurance percentage, often 0.5%, to the value even when you enter none. On $5,000, that is $25.00 of phantom value, and at 36.5% it adds $9.13 of duty. Look for any line that shows a value larger than what you typed.
Check 5: is HMF charged only on ocean freight?
19 CFR 24.24 sets HMF as a "port use fee of 0.125 percent (.00125) of its value", collected on port use. Air shipments do not pay it.
Test: run the reference shipment by air. If the tool shows 0.125% × $5,000 = $6.25 of HMF, it is not distinguishing transport mode. Then run 8504.40.95.50 by ocean at $10,000: HMF should be exactly $12.50, with no floor or cap.
Check 6: does it use your 10-digit code, or a product category?
Category-based estimators ask "apparel" or "electronics" and apply an average. Inside heading 6109 alone, the base rate runs from 2.6% (silk) to 32% (man-made fibers). On $5,000, cotton at 16.5% is $825.00 and man-made fiber at 32% is $1,600.00, a $775.00 swing that a category average cannot resolve. Section 301 and forced-labor exemptions are also code-based. See HS code vs HTS code for why the last four digits matter.
Check 7: does it show cents?
Your entry summary is in dollars and cents. A tool that rounds MPF to $35 or duty to the nearest dollar cannot be reconciled with a broker invoice line by line. When you are checking 40 entries a month, rounding hides real differences. Every figure on the reference shipment ends in exact cents: $825.00, $375.00, $625.00, $34.58.
Check 8: which HTS revision is it running?
The HTS changes many times a year. Our tools run on HTS 2026 Revision 23, published by the USITC on 2026-11-10. Two recent changes show why the revision matters:
- Added: the forced-labor line 9903.05.31 at + 12.5% for China, from 2026-07-24. A tool on a revision from before that date shows $625.00 less duty on the reference shipment.
- Removed: Revision 23 notes that "headings 9903.03.01–9903.03.11 expired at the close of July 23, 2026." Heading 9903.03.01 reads + 10%. A tool still applying it would show $500.00 more duty on the reference shipment.
A trustworthy tool names its revision and has a public changelog.
Run a second test: an ocean shipment on List 3
One test case can hide a weakness. The T-shirt goes by air and sits below the MPF floor, so it never exercises HMF or the ad valorem MPF. Run this second case right after it:
| Input | Value |
|---|---|
| HTS code | 8504.40.95.50 (static converter) |
| Origin | China |
| Customs value | $10,000 |
| Mode | Ocean |
| Entry date | 2026-11-14 |
The correct answer:
| Line | Amount |
|---|---|
| Base duty, 8504.40.95, Free | $0.00 |
| 9903.88.03, List 3, + 25% | $2,500.00 |
| 9903.05.31, + 12.5%, subject to the forced-labor exemption check | $1,250.00 |
| Total duty (37.5%) | $3,750.00 |
| MPF, 0.3464% (above the floor) | $34.64 |
| HMF, 0.125% | $12.50 |
| Landed (value + duty + fees) | $13,797.14 |
This case catches three more problems. A tool that shows "Free" and stops has skipped Chapter 99 entirely. A tool that shows $34.58 MPF is applying the floor where the percentage already exceeds it. And a tool that shows no HMF on an ocean entry is missing a fee you will see on the broker invoice.
Your scorecard
| # | Check | Pass looks like | Reference-shipment cost of a miss |
|---|---|---|---|
| 1 | MPF fiscal year | $34.58 floor from 2026-10-01 | $1.00 to $2.91 per entry |
| 2 | 9903 lines automatic | 9903.88.15 and 9903.05.31 listed by number | $1,000.00 understated |
| 3 | No CIF duty base | Freight and insurance excluded | $219.00 overstated |
| 4 | No phantom insurance | Value equals your input | $9.13 overstated |
| 5 | HMF by mode | $0.00 on air | $6.25 overstated |
| 6 | 10-digit code | Rate from 6109.10.00 | Up to $775.00 either way |
| 7 | Cents | $34.58, not $35 | Cannot reconcile |
| 8 | Current HTS revision | Revision 23 named | $500.00 to $625.00 either way |
How our calculator handles each one
Every check above is a rule in our methodology: MPF floor and cap picked by entry date, Chapter 99 lines matched from the HTS notes, customs value kept to the transaction value, HMF only for ocean, 10-digit lookup, two-decimal output, and the HTS revision printed on every result. You can see a full output on the sample report.
FAQ
Are free import duty calculators accurate enough for planning?
The good ones are. Run the reference shipment above. If a free tool returns $1,825.00 of duty and $6,859.58 landed, it handles the layers that matter for China sourcing.
Why does my calculator show a different MPF than my broker?
The most common causes are an old fiscal-year floor or cap, a value that includes freight, or rounding. For entries from 2026-10-01, the floor is $34.58 and the cap is $670.86.
Should a duty calculator include AD/CVD?
It should at least flag AD/CVD exposure, because AD/CVD rates are company-specific and are not printed in the HTS. Our AD/CVD sample check shows how a supplier-name check works.
What is the quickest way to test a new calculator?
Enter 6109.10.00.12, China, $5,000, air, 2026-11-14. The correct duty is $1,825.00 and MPF is $34.58.
Run the reference shipment in our calculator and compare it side by side with any other tool. Then read the methodology to see the rule behind every line.