In late 2026, a China-origin product can carry up to five duty layers at once: the HTS base rate, a Section 301 China list rate, the 12.5% forced-labor Section 301 line (9903.05.31), a Section 232 product line, and any AD/CVD cash deposit. The HTS notes decide which layers combine: the forced-labor line stacks on top of other Chapter 99 duties, but it does not apply to Section 232 goods, which heading 9903.05.90 carves out. A good tariff calculator applies those notes line by line instead of adding every rate it can find.
Here is how each layer works, the rules that connect them, and four product scenarios worked through with today's numbers from HTS 2026 Revision 23.
The five layers
| Layer | Where it lives | Set by | Typical China rate |
|---|---|---|---|
| 1. Base duty | Chapters 1–97, Column 1 General | Congress, via the HTS | Product-specific, e.g. 16.5% or Free |
| 2. Section 301 China lists | 9903.88 and 9903.91 headings | USTR | + 7.5% (List 4A) or + 25% (List 3, 2024 expansion) |
| 3. Forced-labor Section 301 | 9903.05.31 (China), 9903.05.43 (Hong Kong) | USTR | + 12.5% |
| 4. Section 232 | 9903.76 (wood), 9903.82 (metals) and others | President, via proclamation | + 25% wood cabinets, + 50% steel/aluminum/copper |
| 5. AD/CVD | Commerce case, not printed in the HTS | Commerce and CBP | Company-specific |
Every layer is applied to the same customs value, which excludes international freight and insurance under 19 CFR 152.102(f). They add; they do not multiply.
Rule 1: the forced-labor line adds to other Chapter 99 duties
The forced-labor layer came from USTR's July 28, 2026 notice (91 FR 47318), covering 60 economies. For economies that impose a forced-labor import ban or have committed to one, USTR set 10 percent; for every other economy, 12.5 percent, with some economies charged a rate net of the product's MFN duty. China's line is 9903.05.31 at "The duty provided in the applicable subheading + 12.5%", applying from 2026-07-24.
US note 52(a) sets the stacking rule: all products subject to headings 9903.05.20–9903.05.84 "shall also be subject to any additional duty provided for in this subchapter or in subchapter IV of chapter 99," except as provided in subdivisions (b) through (k). So a product on a Section 301 China list pays both.
Rule 2: Section 232 goods skip the forced-labor line
Heading 9903.05.90 covers "Articles of aluminum, of steel or of copper or derivative aluminum or steel articles; passenger vehicles... and light trucks; parts...; medium- and heavy-duty vehicles; parts...; wood products; patented pharmaceutical articles; and semiconductor articles," per note 52(f). Its rate is "The duty provided in the applicable subheading", which means no forced-labor duty for these goods.
In practice: if a product takes a Section 232 line, take 9903.05.31 off.
Rule 3: the 232 wood line keeps the other Chapter 99 duties
For kitchen cabinets and vanities, US note 37(e) says heading 9903.76.03 applies to products of all countries other than the United Kingdom, the EU member nations, South Korea, Japan and Taiwan, and that "any additional duty prescribed in any provision of this subchapter or subchapter IV of chapter 99 shall be imposed in addition to the duty provided in heading 9903.76.03." It also says AD/CVD "shall continue to be imposed in addition."
Note 37(f) lists the covered statistical lines: 9403.40.9060, 9403.60.8093 and 9403.91.0080. Heading 9903.76.04 covers products in those lines that are not wooden kitchen cabinets or vanities or their parts, at the base rate only.
Rule 4: the 232 metal lines are one-per-article, on full value
US note 16(a) says headings 9903.82.02–9903.82.26 "are mutually exclusive, such that an imported article will be subject to no more than one of these headings." Note 16(c) says they apply "to the full customs value" of the listed articles, and for listed articles outside chapters 72, 73, 74 and 76, only "where the weight of the applicable metal is at least 15 percent of the weight of the imported article." Note 16(b) keeps AD/CVD in place on top.
Rule 5: expired layers stay expired
The Section 122 surcharge headings are gone for new entries. HTS Revision 23 states: "headings 9903.03.01–9903.03.11 expired at the close of July 23, 2026. See 91 Fed. Reg. 9339." The IEEPA headings are date-bounded as well. IEEPA duties applied to entries in 2025 and early 2026; see our IEEPA history page for the verified segment table, and our now vs 2025 comparison.
Scenario A: cotton T-shirts, 301 List 4A + forced-labor
6109.10.00.12, China, $5,000, air, entered 2026-11-14.
| Layer | Line | Rate | Amount |
|---|---|---|---|
| Base | 6109.10.00 | 16.5% | $825.00 |
| 301 List 4A | 9903.88.15 | + 7.5% | $375.00 |
| Forced-labor 301 | 9903.05.31 | + 12.5% | $625.00 |
| 232 | none | $0.00 | |
| Total duty | 36.5% | $1,825.00 |
Add MPF of $34.58 (the FY2027 floor, since 0.3464% × $5,000 is $17.32) and no HMF for air: landed $6,859.58.
Scenario B: power converter, 301 List 3 + forced-labor
8504.40.95.50, China, $10,000, ocean.
| Layer | Line | Rate | Amount |
|---|---|---|---|
| Base | 8504.40.95 | Free | $0.00 |
| 301 List 3 | 9903.88.03 | + 25% | $2,500.00 |
| Forced-labor 301 | 9903.05.31 | + 12.5%, subject to the forced-labor exemption check | $1,250.00 |
| Total duty | 37.5% | $3,750.00 |
MPF $34.64, HMF $12.50, landed $13,797.14.
Scenario C: wooden bathroom vanity, 232 + 301, no forced-labor line
9403.60.80.93, China, $10,000, ocean. Subheading 9403.60.80 has a Free base rate and appears in the List 3 subheading list in US note 20(f); 9403.60.8093 is listed in note 37(f).
| Layer | Line | Rate | Amount |
|---|---|---|---|
| Base | 9403.60.80 | Free | $0.00 |
| 301 List 3 | 9903.88.03 | + 25% | $2,500.00 |
| Forced-labor 301 | replaced by 9903.05.90 | none | $0.00 |
| 232 wood cabinets and vanities | 9903.76.03 | + 25% | $2,500.00 |
| Subtotal before AD/CVD | 50% | $5,000.00 |
Then AD. Wooden cabinets and vanities from China are under AD order A-570-106. If the exporter is The Ancientree Cabinet Co., Ltd., the current cash deposit is 7.67%, which is $767.00. If the exporter has no separate rate, the China-wide entity rate of 251.64% applies, which is $25,164.00. Same product, same value: total duty before CVD of $5,767.00 or $30,164.00. The companion CVD order adds its own company rate; check it on our AD/CVD hub.
Scenario D: steel and aluminum articles
A steel or aluminum article listed in note 16(c) takes exactly one 9903.82 heading, for example 9903.82.02 at + 50% on the full customs value, and drops the forced-labor line through 9903.05.90. For a listed derivative article outside chapters 72, 73, 74 and 76, the 232 line applies only when the listed metal is at least 15 percent of the article's weight. That weight test is why our calculator asks for metal content on derivative lines.
Stacking at a glance
| Product situation | Base | 301 China list | Forced-labor 301 | 232 | AD/CVD |
|---|---|---|---|---|---|
| Ordinary goods on a 301 list | Yes | Yes | Yes | No | If in scope |
| Goods on no 301 list | Yes | No | Yes | No | If in scope |
| Wood cabinets and vanities in note 37(f) | Yes | Yes, if listed | No (9903.05.90) | 9903.76.03 | If in scope |
| Steel, aluminum, copper articles in note 16 | Yes | Check the list | No (9903.05.90) | One 9903.82 line | If in scope |
| Exempt under note 52(b) | Yes | Yes, if listed | No | No | If in scope |
FAQ
Do Section 301 and Section 232 tariffs stack?
For the wood cabinet line, yes: US note 37(e) says any additional subchapter III or IV duty is imposed in addition to 9903.76.03. For other 232 programs, read that program's own note. What is consistent across them is that 232 goods covered by 9903.05.90 do not take the 12.5% forced-labor line.
Is the forced-labor tariff 10% or 12.5% for China?
The HTS line for China, 9903.05.31, reads "+ 12.5%". USTR's notice used 10 percent for economies with a forced-labor import ban or a commitment to one, and 12.5 percent for the rest.
Do the layers multiply each other?
No. Each Chapter 99 rate is a percentage of the same customs value. In Scenario A, 16.5% + 7.5% + 12.5% = 36.5%, applied once to $5,000.
Does AD/CVD stack with everything else?
Yes. Note 52(a), note 16(b) and note 37(e) each say AD/CVD continue to apply in addition.
Stop stacking rates by hand. Run the calculator with your code, origin and entry date, and every layer above is applied with the note that justifies it. Our methodology page lists each rule we apply.